Rigging Gear Inspection Training

by Boom Visibility on August 19, 2012

Rigging Gear Inspection Training

Candidates aspiring for an in-house certified rigging gear inspector job can attend a rigging gear inspection training course to build and enhance their skills. A training course of this nature involves a number of hands-on inspection activities combined with classroom workshops.

Rigging Gear Inspection

Iron, steel, and industrial construction companies often prefer to hire in-house rigging inspectors rather than pay a third party on a contract basis.  Many of these rigging gear inspection training and certification programs are company sponsored.

What Does A Rigging Inspector Do?

The main job of a rigging inspector is to ensure better decision making on the floor and in the field.  The rigging inspector decides whether or not rigging equipment is functioning properly, determines when defective, worn out or damaged equipment needs to be taken out of service or replaced, and makes sure equipment is disposed of properly.

A certified rigging inspector can also develop and maintain chain sling and other rigging records and implement an annual rigging inspection program.

Course Duration

The length of a rigging gear inspection course depends upon the institute conducting the training; some programs can last 4 to 8 hours and others may stretch up to 4 days.

Rigging Gear Inspection Major Course Topics

  • ASME Standards and OSHA Rgulations
  • Below the Hook Lifting Devices
  • Rigging hardware
  • Alloy chain slings and inspection
  • Synthetic round slings and inspection
  • Synthetic web slings and inspection
  • Wire rope slings and inspection
  • Wire rope inspections and types
  • Link and rings inspection
  • Shackle and hook inspection
  • Correct use of inspection tools
  • Record keeping requirements
  • Common causes of rigging damage
  • Proper inspection techniques
  • Capacity markings and sling tags
  • Lever hoist and hand chain inspection
  • Beam trolley inspection
  • Beam clamp and plate clamp inspection
  • Swivel ring and eye bolt inspection

Candidates who participate in a rigging gear inspection training program will be instructed in each of the above subjects following the guidelines, standards, and regulations set down by AISI, ASTM, ANSI, and OSHA. This program will also train inspectors to correctly identify damaged and old equipment that is no longer fit for service and must be removed.

To complete the training program and obtain a certificate of qualification, participants are required to achieve at least the minimum passing score in the written exams and must also successfully pass their hands-on inspection practical test.

Educational Requirements

A high school diploma or GED, along with 3 to 4 years of formal apprenticeship are helpful as as is enrolling in a rigging gear inspection course. The employment outlook is good for this field; job prospects are projected to grow through 2020 and pay varies with the level of responsibility. Rigging Gear Inspection.

Previous post:

Next post: